| |
|
|
| STEP ONE: |
|
STEP TWO: (Recommend) |
 |
|
 |
| Remove hinge pin with punch or small screw
driver |
|
Glue pedal using super glue or plastic modeling
glue |
| |
|
|
| STEP THREE: |
|
STEP FOUR: |
 |
|
 |
| While holding the pedal in position use a
drill/driver (On the lowest setting) to insert the self drilling screws into
the pedal |
|
If you prefer you can pre-drill using an 1/8
drill bit and then use a #2 Philips to set the screws. |
| |
|
|
| STEP FIVE: |
|
STEP SIX: |
 |
|
 |
| Reposition the pedal and spring back into the
pedal base |
|
Insert the hinge pin back into the pedal and
base to complete the installation |